rebuild · go-v.org

rebuild · guide 245709 ·

MSI Pulse GL76 Lower Case Removal

MSI Pulse GL76 · Lower Case · Easy · 600 min · disassembly

  • Source iFixit
  • Retrieved 2026-10-29
  • Licence CC BY-NC-SA 3.0
  • Category MSI Pulse GL76
  • Publisher go-v.org rebuild

Tutorial created using the disassembly video...

Steps

  1. Remove the 13 Phillips screws that secure the lower case in place (12 M2.5 x 12 mm screws and 1 shorter M2 x 4 mm screw) as indicated in the photo
    Tool: Phillips screwdriver PH1
  2. Insert an opening pick or a thin plastic card into the seam along the frame, then gently slide it around to unclip the lower case from the rest of the laptop.
    Tool: opening pick
  3. Once all the snap fits on the sides and front are undone, gently lift the cover.
    Tilt it slightly toward the back to release the final snap fits located near the clutch hinge, then remove it completely.

Tools named by the source

Source and licence

SourceiFixit — original guide
LicenceCC BY-NC-SA 3.0 (CC BY-NC-SA)
Retrieved2026-10-29
Recordguideid 245709

Text steps as retrieved; images and embedded media remain at the source. Text is reproduced under the licence shown above.