# MSI Pulse GL76 Lower Case Removal

- Source: [iFixit](https://www.ifixit.com/Guide/MSI+Pulse+GL76+Lower+Case+Removal/245709)
- Licence: CC BY-NC-SA 3.0 (CC BY-NC-SA) — https://creativecommons.org/licenses/by-nc-sa/3.0/
- Retrieved: 2026-10-29
- Artifact: https://rebuild.go-v.org/g/245709

Tutorial created using the disassembly video...

## Steps
1. Remove the 13 Phillips screws that secure the lower case in place (12 M2.5 x 12 mm screws and 1 shorter M2 x 4 mm screw) as indicated in the photo Tool: Phillips screwdriver PH1
2. Insert an opening pick or a thin plastic card into the seam along the frame, then gently slide it around to unclip the lower case from the rest of the laptop. Tool: opening pick
3. Once all the snap fits on the sides and front are undone, gently lift the cover. Tilt it slightly toward the back to release the final snap fits located near the clutch hinge, then remove it completely.

## Text scope
Stored step text: 564 characters; the ingest cap is 12,000 characters. This is all the stored step text; images and embedded media remain at the source.

## Cite this guide
iFixit. "MSI Pulse GL76 Lower Case Removal." iFixit, https://www.ifixit.com/Guide/MSI+Pulse+GL76+Lower+Case+Removal/245709. CC BY-NC-SA 3.0 (CC BY-NC-SA). Retrieved 2026-10-29. Via rebuild.go-v.org/g/245709.
