MSI Pulse GL76 Lower Case Removal ================================= Source: https://www.ifixit.com/Guide/MSI+Pulse+GL76+Lower+Case+Removal/245709 Licence: CC BY-NC-SA 3.0 (CC BY-NC-SA) Retrieved: 2026-10-29 Artifact: https://rebuild.go-v.org/g/245709 Tutorial created using the disassembly video... 1. Remove the 13 Phillips screws that secure the lower case in place (12 M2.5 x 12 mm screws and 1 shorter M2 x 4 mm screw) as indicated in the photo Tool: Phillips screwdriver PH1 2. Insert an opening pick or a thin plastic card into the seam along the frame, then gently slide it around to unclip the lower case from the rest of the laptop. Tool: opening pick 3. Once all the snap fits on the sides and front are undone, gently lift the cover. Tilt it slightly toward the back to release the final snap fits located near the clutch hinge, then remove it completely. Cite this guide: iFixit. "MSI Pulse GL76 Lower Case Removal." iFixit, https://www.ifixit.com/Guide/MSI+Pulse+GL76+Lower+Case+Removal/245709. CC BY-NC-SA 3.0 (CC BY-NC-SA). Retrieved 2026-10-29. Via rebuild.go-v.org/g/245709.